O-ring
STM6113-
Heat exchanger housing for the following Vetus Diesel engines:
M2.02, M2.04, M2.13, M2.C5, M2.D5, M2.06, M2.18
M3.09, M3.28, M3.29
M4.15, M4.35, M4.17, M4.45, M4.55, M4.56
P4.17, P4.19
VH4.65, VH4.80
Please note that it is strongly advised that the heat exchanger tube stack is removed and checked at the end of the season; and any build-up of salt is removed to prevent potential corrosion issues. The heat exchanger should be reassembled using new two o-rings.
Part reference: STM6113
|
£4.10
|
|
NEW filler / pressure cap
18-14715
New design filler / pressure caps for all M-Series, P-
Series and VH-Series Vetus Diesel engines. Used on new engines since 2019.
This cap is used for heat-exchanger cooled engines and keel-cooled engines, regardless of whether they have a calorifier or expansion tank fitted. The cap vents at 1.0 bar and a small length of pipe can be used to drain any coolant overflow into the bilge.
This replaces STM9507 and STM1017 (which are no longer available) but MUST be used with the new-design filler neck - please order a filler neck as well if you require one.
Part reference: 18-14715
|
£16.90
|
|
NEW filler neck
18-14649
New-design filler neck for heat exchanger for all M-Series, P- Series and VH-Series Vetus Diesel engines. Used on new engines since 2019.
This version is for all engines, heat-exchanger or keel cooled, regardless of whether they have an expansion tank or calorifier fitted.
This replaces STM3750 and STM1515 but MUST be used with the new-style black plastic filler cap.
This should be ordered together with the new-type black filler cap if you are replacing the earlier metal caps.
Product code: 18-14649
|
£15.90
|
|
Heat exchanger gasket
STM6252
Gasket for heat exchanger for 2-cylinder Vetus diesel engines.
Part reference: STM6252
|
£9.20
|
|
|
Injection bend gasket
STM6152
Gasket between heat exchanger and injection bend for most Vetus Diesel 2- and 3-cylinder engine.
|
£4.30
|
|
Heat exchanger housing M2
STM6140
Heat exchanger housing for the following Vetus Diesel engines:
M2.02, M2.04, M2.13, M2.C5, M2.D5, M2.06, M2.18
M3.09, M3.28, M3.29
M4.15, M4.35, M4.17, M4.45, M4.55, M4.56
P4.17, P4.19
VH4.65,VH4.80
The diagram shows the original design of heat
exchanger: new heat
exchangers may differ in appearance, but use
the same parts to complete the
installation.
Please note that the heat exchange is supplied
without the filler neck, which should be
ordered separately.
Part reference: STM6140
Delivery on this heat exchanger housing is
approximately 10-14 days.
|
£415.00
|
|