Anode for 25mm shaft
SN25B
Replacement zinc anode for 25mm prop
shaft.
Fits all Vetus and ISO 4566 propeller
shafts.
Part reference: SN25B
|
£10.30
|
|
Key for 25mm propeller shaft
GLA2503
Replacement key for 25mm prop shaft.
6mm x 6mm x 40mm
Fits all Vetus and ISO 4566 propeller
shafts.
Part reference: GLA2503
|
£3.00
|
|
Adaptor key for 25mm propeller shaft
GLA2504
Special adaptor key for 25mm prop shaft.
6mm/8mm x 6mm x 40mm
Special adaptor key to combine an older
(pre
ISO 4566) shaft/propeller to a
current specification (ISO 4566)
propeller/shaft. The key has dual width,
being
6mm wide for half its depth and 8mm wide
for the other half of its depth.
Part reference: GLA2504
|
£27.00
|
|
Locking washer for 25mm shaft
SN2504
Replacement locking washer for 25mm
prop shaft. This is located between the
propeller and the
tailpiece nut and is used to lock the nut to
prevent it from undoing. It is advisable to
replace the
lock ring whenever the propeller is refitted.
Fits all Vetus and ISO 4566 propeller
shafts.
Part reference: SN2504
|
£3.60
|
|
Gland packing 25mm
GLZ2523
Replacement PTFE impregnated gland
packing for Vetus stern gear with stuffing
box for 25mm propeller
shaft.
This is suitable for the previous generation
of Vetus stern gear, type ZWBILAG, which
featured a self-aligning
inner bearing and stuffing box.
Part reference: GLZ2523
|
£7.00
|
|
Replacement rubber for 25mm stuffing box
GLZ2524
Replacement rubber hose for Vetus stern
gear with stuffing box for 25mm propeller
shaft.
This is suitable for the previous generation
of
Vetus stern gear, type ZWBILAG. This
featured a self-aligning
inner bearing and stuffing box. The stern
tube outer diameter is 40mm. This is not
suitable for Vetus stern
gear
with a dual lip seal.
Part reference: GLZ2524
|
£21.90
|
|
Replacement rubber 25mm for ZWB
DLS25009
Replacement rubber hose for water
lubricated stern gear for 25mm propeller
shaft.
This rubber hose suits Vetus stern gear
which has a dual lip seal lubricated by
water (fed via
a small pipe), type ZWB. The stern tube
outer
diameter is 43mm. This is not suitable for
Vetus stern gear with a stuffing box.
Part reference: DLS25009
|
£20.90
|
|
Anode for 30mm shaft
SN30B
Replacement zinc anode for 30mm prop
shaft.
Fits all Vetus and ISO 4566 propeller
shafts.
Part reference: SN30B
|
£16.50
|
|
Key for 30mm propeller shaft
GLA3003
Replacement key for 30mm prop shaft.
8mm x 7mm x 50mm
Fits all Vetus and ISO 4566 propeller
shafts.
Part reference: GLA3003
|
£3.60
|
|
Locking washer for 30mm shaft
SN3004
Replacement locking washer for 25mm
prop
shaft. This is located between the propeller
and the
tailpiece nut and is used to lock the nut to
prevent it from undoing. It is advisable to
replace the
lock ring whenever the propeller is refitted.
Fits all Vetus and ISO 4566 propeller
shafts.
Part reference: SN3004
|
£3.80
|
|
Gland packing 30mm
GLZ3023
Replacement PTFE impregnated gland
packing for Vetus stern gear with stuffing
box for
30mm propeller
shaft.
This is suitable for the previous generation
of Vetus stern gear, type ZWBILAG, which
featured a self-aligning
inner bearing and stuffing box.
Part reference: GLZ3023
|
£8.00
|
|
Replacement rubber for 30mm stuffing box
GLZ3024
Replacement rubber hose for Vetus stern
gear with stuffing box for 30mm propeller
shaft.
This is suitable for the previous generation
of
Vetus stern gear, type ZWBILAG. This
featured a self-
aligning
inner bearing and stuffing box. The stern
tube outer diameter is 44mm. This is not
suitable for
Vetus stern gear
with a dual lip seal.
Part reference: GLZ3024
|
£20.10
|
|
Replacement rubber 30mm for ZWB
DLS30009
Replacement rubber hose for water
lubricated stern gear for 30mm propeller
shaft.
This rubber hose suits Vetus stern gear
which has a dual lip seal lubricated by
water (fed via a small
pipe), type ZWB. The stern tube outer
diameter is 49.5mm. This is not suitable for
Vetus stern gear with a stuffing
box.
Part reference: DLS30009
|
£22.90
|
|
Anode for 35mm shaft
SN35B
Replacement zinc anode for 35mm prop
shaft.
Fits all Vetus and ISO 4566 propeller
shafts.
Part reference: SN35B
|
£20.10
|
|
Key for 35mm propeller shaft
GLA3503
Replacement key for 35mm prop shaft.
10mm x 8mm x 56mm
Fits all Vetus and ISO 4566 propeller
shafts.
Part reference: GLA3503
|
£4.00
|
|
Locking washer for 35mm shaft
SN3504
Replacement locking washer for 35mm
prop shaft. This is located between the
propeller and the
tailpiece nut and is used to lock the nut to
prevent it from undoing. It is advisable to
replace the
lock ring whenever the propeller is refitted.
Fits all Vetus and ISO 4566 propeller
shafts.
Part reference: SN3504
|
£4.00
|
|
Gland packing 35mm
GLZ3523
Replacement PTFE impregnated gland
packing for Vetus stern gear with stuffing
box for 35mm propeller
shaft.
This is suitable for the previous generation
of
Vetus stern gear, type ZWBILAG, which
featured a self-aligning
inner bearing and stuffing box.
Part reference: GLZ3523
|
£10.30
|
|
Replacement rubber 35mm for ZWB
DLS35009
Replacement rubber hose for water
lubricated stern gear for 35mm propeller
shaft.
This rubber hose suits Vetus stern gear
which has a dual lip seal lubricated by
water (fed via a small
pipe), type ZWB. The stern tube outer
diameter is 57mm. This is not suitable for
Vetus stern gear with a stuffing
box.
Part reference: DLS35009
|
£33.30
|
|
Anode for 40mm shaft
SN40B
Replacement zinc anode for 40mm prop
shaft.
Fits all Vetus and ISO 4566 propeller
shafts.
Part reference: SN40B
|
£25.40
|
|
Key for 40mm propeller shaft
GLA4003
Replacement key for 40mm prop shaft.
12mm x86mm x 63mm
Fits all Vetus and ISO 4566 propeller
shafts.
Part reference: GLA4003
|
£5.60
|
|
Replacement rubber 40mm for ZWB
DLS40009
Replacement rubber hose for water
lubricated stern gear for 40mm propeller
shaft.
This rubber hose suits Vetus stern gear
which has a dual lip seal lubricated by
water (fed via a small
pipe), type ZWB. The stern tube outer
diameter is 62mm. This is not suitable for
Vetus stern gear with a stuffing
box.
Part reference: DLS40009
|
£35.90
|
|
Gland packing 40mm
GLZ4023
Replacement PTFE impregnated gland
packing for Vetus stern gear with stuffing
box for 40mm propeller
shaft.
This is suitable for the previous generation
of Vetus stern gear, type ZWBILAG, which
featured a self-aligning
inner bearing and stuffing box.
Part reference: GLZ4023
|
£12.20
|
|
Locking washer for 40mm shaft
SN4004
Replacement locking washer for 40mm
prop shaft. This is located between the
propeller and the
tailpiece nut and is used to lock the nut to
prevent it from undoing. It is advisable to
replace the
lock ring whenever the propeller is refitted.
Fits all Vetus and ISO 4566 propeller
shafts.
Part reference: SN4004
|
£4.00
|
|
Replacement rubber for Type 6 coupling
KO18
Set of replacement rubber dampers for
Vetus Type 6 coupling.
Click image for full drawing.
Part reference: KO18
|
£23.60
|
|