Electric ventilators and blower hose

Large View

Electric ventilators may be used to extract air from a cabin, galley or heads; and may also be used to extract heat from a refrigerator. Three types of Vetus electric ventilator are available.

Type FAN is designed for ceiling mounting and has a very low energy consumption (0.19Amp at 12v). It has near-silent running, so is suitable for use in a cabin at night.

Type TWINLINE is suitable for air extraction from an engine room before the engine is started, for example to remove potentially dangerous vapours.

Type VENT is suitable for use connected to ventilation hose, either for air supply or extraction. It is ignition protected.

Compare Products

	Price
Ceiling ventilator 12v FAN12 Electric ventilator for use under-deck, for example in combination with rain- and splash-proof ventilator type UFO. It has a two-speed switch. Voltage: 12v Power consumption: 0.19 Amp Overall diameter: 130mm Cut-out diameter: 76mm Capacity: 72m³ per hour	£68.80
Ceiling ventilator 24v FAN24 Electric ventilator for use under-deck, for example in combination with rain- and splash-proof ventilator type UFO. It has a two-speed switch. Voltage: 24v Power consumption: 0.11 Amp Overall diameter: 130mm Cut-out diameter: 76mm Capacity: 72m³ per hour	£68.80
In-line ventilator 12v TWINLINEA Electric ventilator for connection into hose of diameter 75mm, which may be connected to shell ventilators type Typhoon or Scirocco. Ignition protected. This ventilator should not be used (in either intake or extraction mode) whilst the engine is running. Voltage: 12v Connection diameter: 75mm Overall length: 128mm Maximum height including bracket: 90mm Width of mounting feet: 128mm Capacity: 4m³ per minute	£38.40
In-line ventilator 24v TWINLINEC Electric ventilator for connection into hose of diameter 75mm, which may be connected to shell ventilators type Typhoon or Scirocco. Ignition protected. This ventilator should not be used (in either intake or extraction mode) whilst the engine is running. Voltage: 24v Connection diameter: 75mm Overall length: 128mm Maximum height including bracket: 90mm Width of mounting feet: 128mm Capacity: 4m³ per minute	£38.40
Extraction vent 12v VENT7612A Electric extraction ventilator with delrin impeller. Ignition protected. Ideal for galley, heads, engine room etc. but Vetus do not advise using this to provide air to an engine room, only for extraction of warm air. Includes mounting bracket and built-in flange for bulkhead connection. An additional flange can be supplied which can be used to: - direct mounting to the ventilator to enable 76mm hose to be connected to the outlet; or - mounting to the other side of the bulkhead to enable 76mm hose to be connected to the bulkhead Voltage: 12v Power consumption: 8Amp Connection diameter: 75mm Overall dimensions: 186mm x 157mm x 168mm Capacity: 4m³ per minute	£63.40
Extraction vent 24v VENT7624A Electric extraction ventilator with delrin impeller. Ignition protected. Ideal for galley, heads, engine room etc. but Vetus do not advise using this to provide air to an engine room, only for extraction of warm air. Includes mounting bracket and built-in flange for bulkhead connection. An additional flange can be supplied which can be used to: - direct mounting to the ventilator to enable 76mm hose to be connected to the outlet; or - mounting to the other side of the bulkhead to enable 76mm hose to be connected to the bulkhead Voltage: 24v Power consumption: 8Amp Connection diameter: 75mm Overall dimensions: 186mm x 157mm x 168mm Capacity: 4m³ per minute	£63.40
Adaptor flange for VENT76A VENTKITA Additional flange for VENT7612A and VENT7624A. This can be used for: - direct mounting to the ventilator to enable 76mm hose to be connected to the outlet; or - mounting to the other side of the bulkhead to enable 76mm hose to be connected to the bulkhead Dimensions Overall dimensions of flange: 120mm x 115mm Connections: 83.3mm / 76mm This adaptor flange is only suitable for the newer VENT7612A and VENT7624A blowers which have an outlet with internal diameter of 82mm - it can not be used with the original version of the ventilator which has a smaller connection. Fixings are not included.	£6.50
Adaptor flange for VENT76 VENTKITX Additional flange for VENT7612 and VENT7624. This can be used for: - direct mounting to the ventilator to enable 76mm hose to be connected to the outlet; or - mounting to the other side of the bulkhead to enable 76mm hose to be connected to the bulkhead This adaptor flange is only suitable for the older VENT7612 and VENT7624 blowers which have an outlet with internal diameter of approximately 75mm - it can not be used with the new version of the ventilator which has a larger connection (82mm). Fixings not included.	£6.00
Blower hose 76mm BLHOSE310A Blower hose made from a woven glass fibre fabric impregnated with PVC. Suitable for all Vetus shell ventilators and extraction ventilators. Withstands temperatures between -20°C and +100°C. Internal diameter: 76mm (3 inch) Please note that this is priced and sold per metre, up to a maximum 10m length. As it is cut to order, we are not able to accept returns unless the product is faulty.	£6.40