Spare parts for hydraulic steering systems

If you require help in choosing the correct steering system, please contact us by email or call us on 01248 811 001

Large View

Vetus hydraulic steering systems have been produced for over 40 years and some of the earliest systems sold are still in daily use.

Even with the best of care, the marine atmosphere can cause some parts to require replacement and so we offer a selection of spare parts for Vetus hydraulic steering systems including seal kits, rod ends and other sundry fittings such as olives, supports and connectors.

Compare Products

	Price
Set inserts & olives for 8mm hose HS10131 Sleeve inserts 6mm and olives86mm for 8mm Vetus hydraulic hose (6mm internal diameter x 8mm external diameter). Suitable for hydraulic systems using MTC30 cylinder with MTP2008, HTP2008, MTP3008 or HTP3008 hydraulic helm pumps. This product consists of a pack of 10 sleeve inserts and 10 olives. Part reference: HS10131	£56.00
Olive for 10mm hose HS894 Olive 10mm (internal diameter) x 8.3mm length for Vetus hydraulic hose 10mm (6mm internal diameter x 10mm external diameter). (Sold singly). This olive should be used with the brass fittings (HS1039) on the rear of Vetus hydraulic helm pumps or in K30/140 non- return valve blocks only. It is is not suitable for use in hydraulic cylinders, bypass valves or tee-pieces, where HS897 should be used. Part reference: HS894	£3.20
Olive for 10mm hose HS897 Olive 10mm (internal diameter) x 10.4mm length for Vetus hydraulic hose 10mm (6mm internal diameter x 10mm external diameter). (Sold singly). This olive should be used with the chromed fittings on Vetus hydraulic cylinders, bypass valves or tee-pieces. It is is not suitable for use in Vetus hydraulic helm pumps or non-return valve blocks, where HS897 should be used. Part reference: HS897	£3.90
Pipe connection for 8mm hose HS1010MS Pipe connection for 8mm Vetus hydraulic hose (6mm internal diameter x 8mm external diameter) to 1/4" BSP thread (not pictured). Connects hose into the back of Vetus hydraulic steering pumps and also into MTC30 hydraulic cylinder. Part reference: HS1010MS - supplied as a pair of fittings	£20.00
Pipe connection for 10mm hose HS1039MS Pipe connection for 10mm Vetus hydraulic hose (6mm internal diameter x 10mm external diameter) to 1/4" BSP thread (not pictured). Connects hose into the back of Vetus hydraulic steering pumps. Part reference: HS1039MS - supplied as a pair of fittings	£20.00
Rod end for MTC30 cylinder HS071 Stainless steel rod end for Vetus MTC30 hydraulic steering ram. M10x1.5 Part reference: HS071	£45.00
Rod end for MTC52 & MTC72 cylinder HS101 Stainless steel rod end for Vetus MTC52 and MTC72 hydraulic steering rams. M12x1.75 Part reference: HS101	£56.00
Rod end for MTC125 & MTC175 cylinder HS210 Stainless steel rod end for Vetus MTC125 and MTC175 hydraulic steering rams. M20x1.5 Part reference: HS210	£159.00
Rod end for MT75 & MT80 HS842 Rod end for Vetus MTC75 and MTC80 hydraulic steering rams. M16 Part reference: HS842 (limited stock)	£36.00
Support base for MTC30 HS130 Nylon support base for MTC30 ram: this is the part that attaches the ram to the vessel and allows the ram to pivot/swivel. Part reference: HS130	£21.80
Bleed tee for MTC52, MTC72, MTC125, MTC175 HS868 Bleed tee-piece fitting for hydraulic rams MTC52, MTC72, MTC125 & MTC175 with connection for 10mm hose and bleed fitting. Part reference: HS868	£24.40
Seal kit for HTP Pump SET0199 Seal kit for Vetus HTP hydraulic steering pumps, HTP20, HTP30 & HTP42. Includes rear gasket and shaft oil seal required to rebuild the helm unit pump. The kit is suitable for versions with and without non-return valves, but there are no seals for the non return valve block included in the kit. HTP pumps were produced from 2005 and do not have a mounting flange around the circumference of the pump body. Part reference: SET0199	£34.00
Seal kit for MTP Pump HS37N Seal kit for Vetus MTP hydraulic steering pumps, MTP20, MTP30, MTP42 & MTP53. Includes rear gasket and shaft oil seal required to rebuild the helm unit pump. The kit is suitable for versions with and without non- return valves, but there are no seals for the non return valve block included in the kit. MTP pumps were produced up to 2005 and can be identified by the mounting flange around the circumference of the pump body. Part reference: HS37N	£16.90
Copper washer for helm pump HS108 Copper washer for sealing pipe connectors into a Vetus hydraulic steering pump. Suitable for fittings HS1010MS (8mm pipe) and HS1039MS (10mm pipe). Part reference: HS108	£1.00
Seal kit for MTC30 HS820 Seal kit for Vetus hydraulic steering MTC30 ram. Includes all seals and o-rings required to completely rebuild this cylinder. Click the image to the left for a full dimensional drawing, which may help identification of a cylinder. Part reference: HS820	£29.70
Seal kit for MTC52 HS863 Seal kit for Vetus hydraulic steering MTC52 ram. Includes all seals and o-rings required to completely rebuild this cylinder. Click the image to the left for a full dimensional drawing, which may help identification of a cylinder. Part reference: HS863	£53.40
Seal kit for MTC72 HS863- Seal kit for Vetus hydraulic steering MTC72 ram. Includes all seals and o-rings required to completely rebuild this cylinder. Click the image to the left for a full dimensional drawing, which may help identification of a cylinder. Part reference: HS863	£53.40
Seal kit for MTC125 HS864 Seal kit for Vetus hydraulic steering MTC125 ram. Includes all seals and o-rings required to completely rebuild this cylinder. Click the image to the left for a full dimensional drawing, which may help identification of a cylinder. Part reference: HS864	£51.60
Seal kit for MTC175 HS864- Seal kit for Vetus hydraulic steering MTC175 ram. Includes all seals and o-rings required to completely rebuild this cylinder. Click the image to the left for a full dimensional drawing, which may help identification of a cylinder. Part reference: HS864	£51.60
Seal kit for MT75 / MT80 HS822 Seal kit for Vetus hydraulic steering MT75 and MT80 rams. Includes all seals and o-rings required to completely rebuild this cylinder. Part reference: HS822	£25.30